Tag: manuals

ACV boiler manuals

ACV boiler manuals pdf download

 

These instructions are an integral part of the equipment to which they relate and must be handed to the user.
The product must be installed and serviced by qualified engineers in accordance with the regulations in force.
ACV declines all liability for any damage caused as a result of incorrect installation or in the event of the use of appliances or accessories that are not specified by ACV.
We recommend that you have your system serviced each year by a qualified engineer. In normal operation the burner starts automatically if the temperature of the boiler is below setpoint Before carrying out any work on the boiler, isolate it from the electrical supply at the switch on the external control box. Also move the main switch on the control panel to “OFF”.

Find out more from the boiler manual ………….

acv boiler manuals
ACV boiler manuals

BoilerMate A-ClassOV manual

The BoilerMate A-ClassOV pdf Download

The BoilerMate A-ClassOV shown schematically above is designed to provide improved space heating and mains pressure hot water when coupled to any remotely sited condensing or non condensing boiler.
The principle of a BoilerMate A-Class is to separate the heat generator e.g. a boiler from heat emitters (radiators) by a thermal store, which evens out the fluctuating demands for heating and hot water.

An important feature of this concept is that hot water can be supplied directly from the mains at conventional flow rates without the need for temperature and pressure relief safety valves or expansion vessels. This is achieved by passing the mains water through a plate heat exchanger. The outlet temperature of the domestic hot water is maintained by a printed circuit board (A.C.B.), which controls the speed of the pump
circulating the primary water from the store through the plate heat exchanger.

To comply with the Benchmark Guidance Note for Water Treatment in heating and hot water systems the installer should check the hardness levels of the water supply and if necessary fit an in-line scale inhibitor/reducer to provide protection to the
whole of the domestic water system.

Find out more from the boiler manual below………….

Grandee oil boilers manual

Grandee oil boilers manual pdf

Your Grandee oil boiler is designed and manufactured to the highest
engineering standards known to us and should give long and
satisfactory service if installed, commissioned and serviced correctly.
All Grandee appliances are fully automatic and capable of producing
heat for hydronic central heating systems, both sealed or
open vented, and for domestic hot water.

Your heating engineer should be capable of calculating and fitting
the necessary equipment for your central heating system and the
incorporation within the system of your Grandee appliance.
In essence, your Grandee boiler will respond to its instructions, that
is, it will switch on and off when the control devices, normally a programmer or time clock, direct it to. Heating World do not supply
programmers or time clocks and your heating engineer will explain
the operation of the type supplied to you.
As far as your Grandee boiler is concerned there is very little for you
to concern yourself with but it will be helpful to understand the following:

Get the boiler Manual download now………….

Grandee oil boilers manual

Grandee oil boilers